October 8, 2025
94GHz Elastomer Socket for BGA1440
Test a 75 watt BGA device with high performance elastomer using a simple swivel lid mechanism. Elastomer connects each signal with -1dB insertion loss at 94GHz frequency ...
|
September 8, 2025
94GHz Socket for BGA400 with 12 Watt Power Dissipation
Test and debug 17x17mm IC, 0.8mm pitch with high performance elastomer socket with 94GHz bandwidth while operating at -55C to +160C. Heatsink compression screw ...
|
August 18, 2025
Chip Size Socket for 0.5mm Pitch BGA35
Ironwood Grypper sockets are great for enabling fast easy swap out of a BGA device for development sorting and failure analysis. The Grypper socket allows you to simply ...
|
June 18, 2025
Pneumatic Lid for Adjustable Control of Socket Force
Pnuematic lids are a new option for controlling socket contact force. Great option for maintaining reliable force for applications in temperature cycling, high contact ...
|
May 5, 2025
ATE Test Contactor for MSOP10 with Manual Actuator
Test, debug, setup using manual actuator for production run of MSOP10 in Esmo Talos handler. Picoraptor2 test contact in cartridge configuration can test 500K devices before ...
|
April 10, 2025
Imperium Thermal Chuck and Socket Adapter for 45 x 37.5mm IC Device
Connect adapter plate to the test socket, place device inside, and latch thermal chuck. Actively control 10 watt DUT from -40C to +155C using Imperium Thermal System
|
March 4, 2025
94GHz Elastomer Socket for FCCSP78
Quickly and easily Socket your 0.5mm pitch 15x6 array, FCCSP78 packages on any application board with performance equivalent to direct solder version using high speed ...
|
February 11, 2025
Elastomer BGA Socket for Network Processor
To verify the performance of high power network processor chip, 94+ GHz bandwidth elastomer socket can be used with heatsink/axial flow fan to remove 135+ watts of heat ...
|
November 19, 2024
GTP Elastomer Sockets for High-Speed Applications
Ironwood is now producing elastomer sockets which include a protective "P" layer that allows for more insertions by protecting the elastomer from erosion and debris build ...
|
October 3, 2024
Device Interface with Heater, Temperature Sensor and Controller
To characterize the IC device at a certain temperature, a Compression plate (interfaces with IC device) is used with an integrated heater and thermocouple that are connected ...
|
